A/B Switches¶

There are 1, 2, 4, 8, 12 and 16 pole version of the double throw (DT) switch modules. These modules act like a 2 to 1 selectors for audio signals. the switch state for all channels is controlled by single control signal input. For each module, there are two sets of inputs labeled "A" and "B" When the control signal input is less than 50%, the switch(es) select the "B" input. When the control signal input is greater than, or equal to 50% the switch(es) select the "A" input. A quick cross-fade is applied to the audio so that transitions are smooth.

Two LEDs indicate which set of inputs are selected. A space is provided to name each audio channel. Click in the text entry box and enter a name. The name entered will also appear on the module's input labels.

Note: Unlike mechanical switches, these switches are not bi-directional and must be connected according to the "In" and "Out" labels.