Skip to content

Controls That Cannot Be Exported to SymVue

Some module controls and features in Composer are not able to be controlled externally and are therefore unavailable for export to the SymVue environment.

The following is a list of the controls that will not export to SymVue for PC or Control Server:

  1. Oscilloscope Graph: Trigger and Auto-Range controls.
  2. Flex EQ/British EQ: Flatten All and Octaves/Q buttons.
  3. Graphic EQ: Flat button.
  4. Loudspeaker Managers: Flatten All button.
  5. Feedback Fighters: Response Preset buttons.
  6. Matrix Mixer: Disconnect All, Connect All, Mute All Outputs, Unmute All Outputs, Mute All Inputs, Popup buttons.
  7. Gating Automixers: Default and Last On buttons.
  8. Delay: Default temperature button - C/F temperature fields can’t be edited.
  9. RS-232 String Output: ASCII and Binary buttons.
  10. RS-232/485 Input: Control number.
  11. Continuous SPL Computer: Calibrate button and Link button.
  12. Speed Dialer: Name and Number fields will export but can't be edited.
  13. Stereo Compressor: Link button.
  14. Matrix Selector: Mute All button.
  15. Analog Telephone Interface Card Module. The Settings button.
  16. Ramp Processor: Link button.
  17. Linear to Custom Taper: Graph.
  18. DTMF Decoder: DTMF Sequence, Output Name, and DTMF Detect fields can’t be edited.
  19. 2 Line VoIP Interface: Configuration Settings button.
  20. String Output Module: ASCII/Binary radio button. String to Output will export but can't be edited.
  21. Network String Output Module: ASCII/Binary and UDP/TCP radio buttons. String to Output, IP Address, and Network Port fields will export but can't be edited.
  22. Super Matrix: Mute (selected inputs), Unmute (selected inputs), Solo (selected inputs), Solo Off (selected inputs), Gain ± (selected inputs), Mute All Inputs, Unmute All Inputs, All Input Solos Off, Mute (selected outputs), Unmute (selected outputs), Pre (selected outputs), Post (selected outputs), Gain ± (selected outputs), Mute All Outputs, Unmute All Outputs, All Outputs Pre, All Outputs Post, On (selected crosspoints), Off (selected crosspoints), Gain ± (selected crosspoints), Delay ± (selected crosspoints), Connect All, Disconnect All.
  23. Duet 4K-Encoder & Duet 4K-Decoder: Web Configure... button and Video Wall Wizard... button
  24. Command Buttons: Command Type "Web Pages" do not export to SymVue for PC
  25. Email Output: "Configure Server ..." button